How to... Make a Cube in Continuous Rounds Part II

As promised, here are the variations to make your amigurumi cubes even more even and pretty!

Learn how to make the corners of your amigurumi cube align every time, how to make your decreases unnoticeable and how to create shaper edges! All while working in continuous crochet rounds!

Crochet amigurumi Gir from Invader Zim

I used them same techniques to create the head for Gir! =D

Check the previous videos to now how to work a crochet square in continuous rounds and then transforme it into a cube!

How to... Make a Cube in Continuous Rounds

You can use amigurumi cubes to make robots, kids games, cubic animals, body parts or normal dice!

This tutorial in the continuation of the one where we made the square in continuous rounds!

To crochet a cube in rounds:

- Work without increases or decreases until you reach the desired height;

- To start to close the cube work the same number of single crochets between the corners as in the last round where you increased;

- To make the corners and close the cube decrease using the single crochet 3 together (sc3tog);

- Always start working the sc3tog in the stitch before the sc3tog on the previous round;

- The stitches between the decreases always decrease by 2.

With these rules you can make cuboid amigurumi in the shapes you like!

Next week I’ll try a couple of variations we can use when making a cube in continuous rounds!

How to... Make a Square in Continuous Rounds

A crochet square can be used as an accessory or an aplique but most useful in amigurumi it can be used as the base for a cube or other cuboid shapes.

As my preferred way of making amigurumi is in continuous rounds or spirals I also prefer to make squares, that are going to be turned into 3d shapes, in the round.

To learn how to make a square working in spirals watch the video below!

To crochet a square in the round:

- Work 4 single crochets into the Magic Ring;

- Work 3 single crochets on all stitches of the previous round;

- Keep working up to the desired size always keeping in mind the 2 rules:

  1. Always work the corners in the middle stitch of the corner of the previous round, and
  2. The stitches between the corners always increase by 2 from round to round.

Next week I'll turn this square into a cube! Make sure you don't miss it!

How to... Join with a Double Crochet

Learn how to join a new yarn to your crochet work using the double crochet stitch.

With this technique you can add the new yarn in any stitch of your work and you don't need to chain to do it!

How to... Slip Stitch All Around

How to work all around the edges with the slip stitch on a crochet piece that was worked in rows.

I use this technique on crochet pieces that are going to be attached to other crochet works or amigurumi. It gives me a tidy edge and a way to make my sewing stitches without being messy.

In the next video I will share how to attach a flat crochet piece that was worked in rows to another. Stay tuned!

How to... Close Amigurumi - Flat Closure

Learn how to close the top of your amigurumi pieces flat!

This techniques is very useful when you want the arms of your amigurumi to lay flat against their body instead of out to the side, or when you want your migurumi softies to be able to sit down!

Here are two examples where I used this technique: 

Diddlina amigurumi stuffed toy

I used this technique for Diddl's and Diddlina's arms because I wanted them to lay flat against their bodies.

Boy and girl amigurumi

 I used the same technique for Alice and Luca's legs, so they're able to sit down!

Have you used this technique before? How? Let us know in the comments below!

 

How to... Linked Half Double Crochet

Learn how to make this variation of the half double crochet: the linked half double crochet!

The linked half double crochet creates a denser fabric than one worked with half double crochets and it works up just as fast because the stitches are the same height.

The fabric has no gaps between the stitches, all the edges are neat and straight, and the horizontal bar along the rows give it extra texture and detail!

A great stitch to learn! =D

 

How to... Crochet an Amigurumi Cylinder

The cylinder is very useful when you want to make shapes that stand on its own. You can use it to make feet, legs, long bodies, hats, barrels, cups... 

Learn how to crochet a cylinder by using these simple rules:

1. Start with a flat circle

Crochet a flat circle with the diameter you want your cylinder to have.

2. Work up and on the back loop

Work without increases or decreases into the back loops only.

3. Increase height

Work without increases or increases until you reach the height you want for your cylinder.

4. Decrease to close

Decrease evenly around on all rounds until you have 8 to 6 stitches.

Important: the first round of decreases must be worked into the back loops.

5. Close and finish off

Close the opening and finish off securing the yarn.

The cylinder is complete and ready to be used! =)

 

How to... Crochet a Pill Shaped Amigurumi Piece

The pill shaped amigurumi pieces are great to make arms, legs, tails, snakes or any elongated piece you would like! =)

Learn how to crochet a pill shaped amigurumi piece following these simple rules:

1. Start with a flat circle

Crochet a flat circle with the width you want your "pill" to have.

2. Work up

Work more rounds without increases or decreases than the ones where you increased. For example if you increased for 4 rounds work, at the very least, 5 rounds without decreasing or increasing. The more rounds you work this way the longer your "pill" will be.

3. Decrease to close

Decrease evenly around on all rounds until you have 8 to 6 stitches.

4. Close and finish off

Close the opening and finish off securing the yarn.

The "pill" is complete and ready to be used! =)

 

 

How to... Crochet an Amigurumi Ball

Balls are a very useful form to crochet for your amigurumi! They make great heads, eyes, embellishments, bodies... the imagination is the limit! =)

To crochet an amigurumi ball follow these simple rules:

1. Start with a flat circle

Crochet a flat circle to the width you want your ball to have.

2. Work up

Work the same amount of rounds with no decreases or increases as the number of rounds you increased on. For example: if you started by increasing on 5 rounds, now you need to work 5 rounds without increasing or decreasing.

3. Decrease to close

Decrease evenly around on all rounds until you only have 8 to 6 stitches or less.

4. Close and finish off

Close the opening and finish off securing the yarn.

And that's it! Your ball is finished and ready to use! =D

How to... Crochet a Flat Circle

Learn how to crochet a flat circle using these simple rules! 

All you need to do is follow this simple rules:

1. Start with the right number of stitches

If you start with too many stitches your work will become wavy, and if you start with too few your work will bunch up into a cup.

The taller the stitch you're using the more stitches you need to start with:

- If you're crocheting with single crochet start with 6 to 8 stitches.

- If you're crocheting with half double crochet start with 8 to 10 stitches.

- If you're crocheting with double crochet start with 12 to 14 stitches.

The number of stitches you start with may vary depending on your tension and the yarn you're using.

2. Increase evenly on all rounds

Increase the same amount of times as the number of stitches in your first round.

Have the same number of stitches between the increases throughout the round.

For example, if you're working with single crochet and started with 6 stitches your work will look like this:

Round 1: 6 single crochets into the Magic Ring (6st)

Round 2: increase on all stitches (12st)

Round 3: (1 single crochet, 1 increase) x 6 (18st)

Round 4: (2 single crochet, 1 increase) x 6 (24st)

...

Notice how on every round there's one more stitch between the increases, and how the total number of stitches at the end of each round keeps increasing in multiples of 6.

And that's all you need to know to crochet a flat circle with single crochet, half double crochet and double crochet! Use this technique when you want to make crochet flowers, bags, bowls, mandalas and even some amigurumi pieces where you want the finished project to stand upright!

How to… Join with Single Crochet

Learn how to join a different yarn, with a single crochet, to your work.

This technique is very useful when you want to add a different color to the beginning of a row. You don't need to chain in the beginning of that row which gives it a smooth edge.

Have you used this technique before? Did you like it or not?

How to… Work in the Back Loop Only

Learn how to work in the back loops only!

Working in the back loops only allows you to add texture to your work in a very simple way. It's a very useful technique to know to create amigurumi shapes that need sharp corners!

This technique can be used with all crochet stitches!

Hope this tutorial helps you! Leave comments, questions and suggestions in the comments bellow! =D

How to... Half Double Crochet

Hello everyone!

Learn how to work the half double crochet!

The half double crochet is between the single crochet and double crochet regarding to height. Instead of working off the loops two by two, like in the double crochet, you work off all three loops at once. The half double crochet creates a tight fabric, similar to the single crochet, but because it is taller it works up quicker!

Its abbreviation is hdc.